EGR Supprimer Kits et Refroidisseurs

2008 - 2010 Ford 6.4L Powerstroke ($70 core charge will be applied)

This kit makes it easier to get all the parts that you need to Bullet Proof your 6.4L EGR Coolers. This kit includes:

2008 - 2010 Ford 6.4L Powerstroke ($70 core charge will be applied)

2007.5-2010 GM 6.6L Duramax LMM - Flo~Pro's laser cut stainless steel EGR blocker plate installs in roughly 30 minutes with normal hand tools. Race tuning required.

2008-2010 Ford 6.4L Powerstroke - Mel's Manufacturing's laser cut stainless steel EGR blocker plate installs in roughly 30 minutes with normal hand tools. Race tuning required.

2004-2006 GM 6.6L Duramax LLY LBZ - When removing the EGR cooler from your vehicle, Mel's Manufacturing's laser cut stainless steel EGR blocker plate is used to cap off the port that the cooler was connected to. Installs in roughly 30 minutes with regular hand tools. Race tuning required.

2011-2016 GM 6.6L Duramax LML - Mel's Manufacturing's laser cut stainless steel EGR blocker plates are used when removing the EGR cooler. Race tuning required.

2017-2023 GM 6.6L Duramax L5P - Mel's Manufacturing's EGR Delete kit for off-road /race use comes with everything needed to get rid of the stock system in your diesel truck.

2020-2023 GM 6.6L Duramax L5P - Mel's Manufacturing's EGR Delete kit for off-road /race use comes with everything needed to get rid of the stock system in your diesel truck.

2017-2019 GM 6.6L Duramax L5P - Mel's Manufacturing's EGR Delete kit for off-road /race use comes with everything needed to get rid of the stock system in your diesel truck.

Mel's Manufacturing's basic EGR cooler only delete for your 2003-2007 Ford 6.0L Powerstroke F250/F350/F450/F550

Mel's Manufacturing's EGR cooler delete for your 2003-2007 Ford 6.0L Powerstroke F250/F350/F450/F550

2004 - 2007 Ford Powerstroke 6.0L (Square EGR configurations)

2003 - Early 2004 Ford 6.0L Powerstrokes - BD’s replacement Heavy Duty EGR Cooler uses TIG welded 304L stainless 0.375 in. O.D. x 0.048 in. walled tubes to replace the OEM inner cores that have been known to fail due to weak brazed joints.

2004-2007 Ford 6.0L Powerstroke Square Cooler. AFE EGR Coolers are made from stainless steel components and are welded, not brazed to improve reliability.

2004 - 2007 Ford 6.0L Powerstroke (Square Cooler)

Ford Motorcraft 6.7L 2011-2016 F250, F350 Powerstroke EGR Cooler

Motorcraft molded heater hoses are pre-shaped for an easy install into your vehicle. They are made of EPDM rubber-over-braid to resist splitting, cracking, and swelling. They are extremely strong and resistant to environmental elements, so they'll last a long time.

2004 - 2007 Ford Powerstroke 6.0L (Square Cooler)

EARLY 2003 Ford Powerstroke 6.0L (Round Cooler) - 100 Core Charge will Apply

2004.5 - 2005 GMC/Chevy Duramax 6.6L LLY - 150 Core Charge will apply

The Best Solution for your 2003-2006 6.0L Ford Powerstroke diesel. This kit includes everything needed to fix all the major problems with the 6.0L Powerstroke engines with 18mm dowels. No more stretched bolts, blown head gaskets, white smoke from the EGR cooler, or defective EGR valves.

The Best Solution for your 2006-2007 6.0L Ford Powerstroke diesel. This kit includes everything needed to fix all the major problems with the 6.0L Powerstroke engines with 20mm dowels. No more stretched bolts, blown head gaskets, white smoke from the EGR cooler, or defective EGR valves.

If you're looking to delete your 3.0L Ram EcoDiesel Engine the P1 Race Products kit is what you need. It's designed to completely remove the EGR cooler on your EcoDiesel to both declutter your engine bay and eliminate dirty oxygen deprived exhaust gases going back into your intake.

BC Diesel's EGR & Cooler delete kit use just the block-off plates or remove the entire troublesome EGR Valve and Cooler system in your 2014-2018 EcoDiesel. Race tuning required!

With this kit from Mel's Manufacturing you can either use just the blockoff plates or remove the entire troublesome EGR Valve and Cooler system in your 2014-2018 EcoDiesel Race tuning required!

2008-2010 Ford Powerstroke 6.4L F250-F550 - Alliant Power's OEM-style replacement Exhaust Gas Recirculation (EGR) Temperature Sensor on the inlet side. Made to meet or exceed OEM specifications at a price that you can afford.

2008-2010 Ford Powerstroke 6.4L F250-F550 - Alliant Power's OEM-style replacement Exhaust Gas Recirculation (EGR) Temperature Sensor on the outlet side. Made to meet or exceed OEM specifications at a price that you can afford.

2008-2010 Ford Powerstroke 6.4L F250-F550 - Alliant Power's re-manufactured OEM-style replacement EGR Valve. Made to meet or exceed OEM specifications at a price that you can afford.

2011-2016 Ford Powerstroke 6.7L F350-F550 Narrow Frame Cab & Chassis - Alliant Power's re-manufactured OEM-style replacement EGR Valve is made to meet or exceed OEM specifications at a price that you can afford.

2011-2016 Ford Powerstroke 6.7L F250-F350 Wide Frame Pickup Chassis - Alliant Power's re-manufactured OEM-style replacement EGR Valve is made to meet or exceed OEM specifications at a price that you can afford.

Genuine OEM Motorcraft Ford seal for your Ford 6.0L pickup.

Alliant Power EGR Valve for your 2003-2004.5 6.0L Powerstroke diesel.

Alliant Power New EGR Valve for your 2004.5-2007 6.0L Powerstroke diesel.

Mopar EGR Valve for your 2007-2018 6.7L Dodge Ram truck.

Motorcraft EGR Cooler Hardware Kit for your 2003-2007 6.0L Powerstroke diesel.

Motorcraft EGR Valve for your 2003-2007 6.0L Powerstroke diesel.

Motorcraft Exhaust Gas Recirculation Valve O-Ring Kit for your 2003-2007 6.0L Powerstroke diesel.

Fleece Performance mechanical fuel pump block-off plate for your Dodge Ram 5.9L 12v/24v Cummins diesel pickup.

The P1 Race Products EGR Block Off Kit for 2011 - 2019 6.7L Powerstroke removes the factory exhaust pipe from the exhaust manifold and EGR cooler. The EGR Cooler Inlet Block Off Plate is CNC Machined from 6061 T6 Aluminum and anodized to provide a clean under hood appearance and protect the aluminum from scratches and fluid spills.