Overview
Bilstein 5100 Series Shock Absorbers 24-186636 are high gas pressure monotube shocks expertly designed to be installed onto lifted pickups, SUVs and Jeeps. The shocks feature a 46mm digressive piston with an innovative self-adjusting deflective disc valving. They offer super damping ability that makes them perfect for heavy hauling or occasional off-road use, while maintaining an exceptional street ride.
NOTE: Lift height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet.
Specifications
- Old Part Number: F4-BE5-B514-H0
- Setting: 5100 Series
- Drive Type: 4WD
- Position: Rear
- Descriptor: Rear Lifted Height: 4" GM / 2" Dodge
- Quantity Needed Per Vehicle: 2 (Sold Separately)
- Finish: Zinc plated
- Reservoir: No
- Body Design: 46mm ID smooth body (Non-coilover)
Details
- Collapsed Length (IN): 18.17"
- Extended Length (IN): 29.92"
- Collapsed Length (MM): 461.50mm
- Extended Length (MM): 760mm
- Finish: Zinc plated
- Reservoir: No
- Body Design: 46mm ID smooth body (Non-coilover)
Application
- 2003-2012 Ram 3500 4WD - Rear Lifted 2"
- 2003-2013 Ram 2500 4WD - Rear Lifted 2"
- 2014-2018 GM 1500 Gas 4WD - Rear Lifted 7-9"
- 1999-2010 GM 2500/3500HD 4WD - Rear Lifted 4" (NON-Quadrasteer)
Note
Due to the variety of aftermarket suspension systems, it is recommended to take precise measurements to ensure proper shock fitment. For a pin-to-eye shock, the correct measurement should be taken from the base of the stem, where the mounting hardware rests, to the center of the eyelet.