8600-01 Synergy Heavy Duty Drag Link - Ford 6.0L / 6.4L / 6.7L Powerstroke - 2005-2023

Overview

The Synergy 8600-01 Heavy Duty Drag Link that is an upgrade for the front end of your 2005-2023 Ford F-250/350 Super Duty. This drag link is a direct bolt-in replacement for the factory unit that will deliver an immediate upgrade in steering feel and strength. The drag link is made from high-quality DOM steel tubing for the utmost strength. It features a single plane tie rod end on the axle side which reduces drag link flop. This drag link is machined to allow you to retain the stock steering stabilizer. It is also compatible with most aftermarket stabilizers with the use of a Synergy 4050-50 stabilizer clamp. This heavy-duty drag link was designed with a bend to clear the sway bar so there are no part clearance issues or knocking. You will not find a stronger drag link on the market!

Benefits

Eliminates unwanted drag link flop Drag link retains the stock steering stabilizer Drag link is bent for suspension articulation clearance Synergy Tie Rod ends feature zerk fittings and are serviceable Offers a more direct connection to the road compared to stock Drag link is adjustable on the vehicle without needing to be removed Improves strength and steering feel and eliminates any chance of bending Compatible with stock wheels and tires with correct tie rod end adjustment Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock

FEATURES

No factory drag link components need to be reused Drag Link is CNC formed from 1.50 inch x .250 wall DOM tubing Includes Synergy HD Metal on Metal Tie Rod Ends with oversized 1" shank Single Plane tie rod end used on the axle side to prevent unwanted drag link flop Drag Link bolts right into the factory mounts with no additional wheel requirements Abrasion-resistant powder coat finish for maximum durability and corrosion resistance Both ends of the bar use pinch bolts instead of jam nuts to simplify installation and adjustment 100% bolt-on components assure an easy, trouble-free installation with the use of basic hand tools Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle

Min/Max Length

Measured in a straight line from the center of the bolt hole to the center of the bolt hole

• Max extended length: 45"
• Min collapsed length: 42.625"

Includes

• (2) Pinch bolts & Hardware
• (1) Ford Super Duty HD Drag Link
• (1) 3622-10-14-PL Adjuster Sleeve
• (1) 4152-L Ford Super Duty Pitman Arm Tie Rod End
• (1) 4153-L Ford Super Duty Single Plane Tie Rod End

Note

• Backward compatible with the stock tie rod.
• Synergy tie rod (8602-01) is recommended with Ford F-250/350 but is not required.
• Synergy High-Performance Grease recommended (4119) to be used with all Tie Rod Ends.
• Synergy Premium Copper Infused Anti-Seize (4118) to be used with all threaded components (TRE's and Adjuster Sleeve).
• Ford F-450 / F-550 at full suspension compression, the drag link may contact the outer plastic protective sleeve of the stabilizer. There is no damage to the stabilizer, but to avoid this slight contact we recommend running 1" of bump Stop spacing. If running a tie rod-mounted steering stabilizer, no bump stop spacing is required.