Tie Rods

2001-2010 GMC/Chevy Duramax 6.6L LB7, LLY, LBZ, or LMM - The Cognito Alloy Series Tie Rod kit is a Heavy-Duty stock replacement upgrade where the inner joint incorporates an over-sized alloy ball and socket. Sold as a Pair.

The Cognito 110-90285 Extreme Duty Tie Rod Center Link Kit is a bolt-in complete replacement for stock center link and tie rod assemblies on your 2001-2010 GM 2500HD/3500HD 2WD/4WD

Cognito's Alloy Series tie rod kit for your 2011-2022 GMC/Chevy Duramax 6.6L 2/4WD 2500HD/3500HD truck with the LML/L5P motor.

Cognito's single outer tie rod for your 2011 - 2018 GMC/Chevy Duramax 6.6L 2/4WD 2500HD/3500HD truck with the LML/L5P motor.

Upgrade your tie rods to the bigger, stronger kit from BD Diesel. Increase durability, longevity and dependability of your GMC truck.

Upgrade your tie rods to the bigger, stronger kit from BD Diesel. Increase durability, longevity and dependability of your GMC truck.

Upgrade your steering kit to the bigger, stronger steering kit from BD Diesel with a forged I-beam center link. Increase durability, longevity and dependability of your GMC truck.

Purchase the Hellwig 7267 Big Wig Rear Sway Bar and experience the difference it makes on your GM Silverado/Sierra 2500/3500 HD 2WD/4WD today. The Hellwig Big Wig sway bars are a highly effective upgrade for heavy-duty trucks. They are specifically designed for towing and hauling applications, providing quick and easy installation.

OEM Ford Motorcraft Right Hand Side Lower Outer Tie Rod End

OEM Ford Motorcraft Left Hand Side Outer Tie Rod End

OEM Ford Motorcraft Tie Rod End at Pitman Arm

OEM Ford Motorcraft Tie Rod End at Pitman Arm

OEM Ford Motorcraft Tie Rod End at Pitman Arm

OEM Ford Motorcraft Right Hand Side Upper Outer Tie Rod End

The Synergy 8625-00 Heavy-Duty Steering Kit that will enhance the front end of your 2005-2023 Ford F-250/350. This Heavy Duty Steering Kit was designed with the end user in mind.

The Kryptonite Death Grip Steering Kit KRDSK03 is just what you need if you're looking for the ultimate steering upgrade to your Ram 2500/3500. The solid 7075 Aluminum design and massive 2" outer diameter were designed and built for maximum adjustability with no need to remove from the truck to adjust.

Raise the height in the rear of your 2003-2013 Dodge Ram 2500/3500 with the Synergy 8566-01 1" Rear Lift Shackles from XDP. The Synergy 2003-2013 Dodge Ram 1" Rear Lift Shackles raise the height of the rear of your vehicle.

The Synergy 8567-11 Heavy-Duty Drag Link that will enhance the ride in your 2003-2013 - 4WD Dodge Ram 1500/2500/3500 4WD. This drag link features a durable abrasion-resistant powder coat finish and is manufactured from high-quality materials.

The Synergy 8567-12 Heavy-Duty Drag Link that will enhance the ride in your 2000-2002 Dodge Ram 1500/2500/3500 4WD. This drag link features a durable abrasion-resistant powder coat finish and is manufactured from high-quality materials.

The Synergy 8568-02 Heavy-Duty Tie Rod that will upgrade the ride quality of your 2000-2002 Dodge Ram 1500/2500/3500 4WD. This tie rod features a durable abrasion-resistant powder coat finish and is manufactured from high-quality materials.

The Synergy 8568-21 Heavy-Duty Tie Rod to improve the front end of your 2003-2013 Dodge Ram 1500/2500/3500 4WD. This Synergy Heavy Duty Tie Rod is designed to be a bigger and stronger, replacement for the factory tie rod in your truck. No drilling, reaming, or modifying of the knuckles is required when installing this tie rod.

The Synergy 8702-01 Heavy-Duty Tie Rod to improve the steering in your 2014-2024 Ram 2500/3500. This tie rod features a new design and components specific to the new radius arm Ram Truck platform. This unit is a direct bolt-in replacement for the factory tie rod for an immediate upgrade in steering feel and strength.

The Synergy 8701-01 Heavy-Duty Drag Link will improve the ride quality of your 2013-2024 Ram 2500/3500. The Synergy Ram Heavy Duty Drag Link has a great design with components specific to the new radius arm Ram Truck platform. It is a direct bolt-in replacement for the factory drag link for an immediate upgrade in steering feel, stiffness, and strength.

The Synergy 8625-02 Heavy Duty Steering Kit With Fox IFP Stabilizer is a time saving upgrade for the 2005-2007 Ford F-250/350 4WD and was designed with the end user in mind. The tie rod and drag link will bolt directly into the stock location for an immediate upgrade in steering feel and strength. There are no wheel size requirements; factory wheels and tires are 100% compatible.

The Synergy 8602-01 Heavy Duty Tie Rod that will replace the weak or bent unit in your 2005-2023 Ford F-250/350. This tie rod is a drop-in replacement for the stock unit for an instant upgrade in steering feel and rigidity. Requires no special wheel size! This tie rod can be installed on a stock f-250 or F-350 with factory wheels and tires by adjusting the tie rod ends.

The Synergy 6401-04 Fox 2.0 Performance Series IFP Steering Stabilizer will enhance the steering in your SUV or Truck. Your truck or SUV will perform at its best thanks to the Synergy tuned performance series 2.0 IFP smooth body steering stabilizers using modern shock technology. Even in the roughest terrain, this stabilizer offers a smooth on-road ride and predictable off-road performance because of Fox's race-proven damping control.

The Synergy 7600-01 Heavy Duty Drag Link that will enhance the front suspension geometry of your 2005-2023 Ford F-450/550. This drag link is a direct bolt-in replacement for the factory drag link for an immediate upgrade in steering feel and strength.

The Synergy 7602-01 Heavy Duty Tie Rod that will replace the weak or bent unit in your 2005-2023 Ford F-450/550. This tie rod is a direct bolt-in replacement for the stock unit for an immediate upgrade in steering feel and rigidity.

The Kryptonite Death Grip Tie Rods KRTR10 is a great option for anyone looking to upgrade the tie rods in their GM Silverado/Sierra 2500HD/3500HD. These tie rod bodies come black powder coated and laser engraved, featuring a black dust boot. Engineered exclusively for the extreme demands of today's heavy-duty trucks, these tie rods are proudly built in the USA to work with both stock and modified suspensions.

The Kryptonite Tie Rod Rebuild Kit (3/4" Thread) 10KRYNEW34 is designed to rebuild the 1st Gen Tie Rod kit in your GM Silverado/Sierra 2500HD/3500HD. This rebuild kit is a direct-fit replacement for the set of Kryptonite tie rods with a stock center link on your truck. This kit comes with replacements for all inner and outer joints on your Kryptonite Tie Rods.

The Kryptonite Tie Rod Rebuild Kit (7/8" Thread) 10KRYNEW78 is designed to rebuild the 2nd Gen Tie Rod kit in your GM Silverado/Sierra 2500HD/3500HD. This direct-fit replacement rebuild kit is for the Kryptonite tie rod set with a factory center link on your truck. This kit includes all inner and outer joint replacements for your Kryptonite Tie Rods.

Add the BDS Suspension BDS123409 Recoil Traction Bars for your pickup. These spring loaded traction bars are engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. These next generation Recoil traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling.

Protect your 2003-2013 Dodge Ram 2500 4WD or 2003-2018 Dodge Ram 3500 4WD Lifted 0-6" from axle wrap with the BDS Suspension BDS122408 Recoil Traction Bar Bracket Kit. BDS Suspension's revolutionary spring loaded, full-floating RECOIL traction bar system is engineered to improve traction and limit axle wrap without limiting suspension travel or decreasing ride quality. BDS RECOIL traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling.

Purchase the BDS Suspension BDS122407 Recoil Traction Bar Bracket Kit for your 2019-2024 Dodge Ram 3500 4WD. This traction bar is a revolutionary spring loaded traction bar system engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality.

Install the BDS Suspension BDS123416 Recoil Traction Bar Bracket Kit (3.5/4" Axle) fonto your 2017-2024 Ford F-250/350 4WD Lifted 0-6". This kit is assembled with high-quality components to ensure it delivers a long and dependable service life.

The BDS Suspension BDS123418 Recoil Traction Bar Bracket Kit provides your 2011-2016 Ford F-250/350 4WD SRW (Long Bed) Lifted 0-6" with a durable and dependable traction bar. BDS Suspension's revolutionary spring loaded, full-floating RECOIL traction bar system is engineered to improve traction and limit axle wrap without limiting suspension travel or decreasing ride quality. BDS RECOIL traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling.

The BDS Suspension BDS121407 Recoil Traction Bar Bracket Kit is what your 2001-2010 GM Silverado/Sierra 2500HD/3500HD needs. This BDS's revolutionary spring loaded traction bar system is engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality.

Purchase the BDS Suspension BDS121408 Recoil Traction Bar Bracket Kit for your 2011-2019 GM Silverado/Sierra 2500HD/3500HD SRW/DRW. This revolutionary spring loaded traction bar system is carefully engineered to improve traction and limit axle wrap without any adverse effects on suspension travel or ride quality.

Add the BDS Suspension BDS121409 Recoil Traction Bar Bracket Kit to your 2020-2023 GM Silverado/Sierra 2500HD/3500HD SRW. This revolutionary spring-loaded traction bar system is engineered to enhance traction and limit axle wrap without adversely affecting suspension travel or ride quality.

Purchase the BDS Suspension BDS121416 Recoil Traction Bar Bracket Kit for your 2020-2024 GM Silverado/Sierra 2500HD/3500HD SRW (Lifted 0-6"). Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.