BDS123409 BDS Suspension Recoil Traction Bars - GM/Chevy 6.6L Duramax - 2001-2024 / Dodge Ram 5.9L/6.7L Cummins 2003-2024 / Ford 7.3L/6.0L / 6.4L / 6.7L Powerstroke (Mounting Kits Required)

Overview

Add the BDS Suspension BDS123409 Recoil Traction Bars for your pickup. These spring loaded traction bars are engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. These next generation Recoil traction bars offer you the freedom to tune the spring compression for optimal performance on-road, off-road, towing, or competition pulling. Recoil traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

These new Recoil traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16" wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large, forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. Both ends are greaseable and serviceable.

Note:  Mounting Kit required for all models. Please see related items below.

FEATURES

• Reduces Axle Wrap
• Improves Traction
• Full Floating Design
• Greaseable Ends
• UHMW Polyurethane Bearings
• Can Be Used On Stock Or Lifted Applications
• Fabricated From 2" OD x 3/16" Wall Steel Tubing
• Threaded Bung Welded In Toward The Axle & CNC Machined End At The Frame