8550-11 Synergy Heavy-Duty Adjustable Front Track Bar- Dodge Ram 5.9L / 6.7L Cummins - 1994-2013

Overview

The Synergy 8550-11 Adjustable Front Track Bar can help correct the front-end geometry of your 1994-2013 Dodge Ram 1500/2500/3500 4WD. This Adjustable Track Bar is designed to increase the strength between the frame and axle and is fully adjustable to help center the axle underneath your truck. This unit can be adjusted from 38.625" (.25" shorter than stock) to 39.438". This allows the track bar to be used when lowering trucks for truck pull & race applications (up to 3" lower than factory height) and lifted applications up to 6.0" over factory height for off-road use. The bar is bent to clear most aftermarket differential covers and uses maintenance-free Synergy Dual Durometer bushings on both ends.

FEATURES

• Increased Strength From Stock
• Maintenance Free, No Greasing Required
• No Modifications Required For Installation
• Adjustable Without Removing From Vehicle
• No Jam Nuts That Are Impossible To Keep Tight
• Bent To Clear Most Aftermarket Differential Covers
• Made From High Quality 1.5" x .250" Wall DOM Tubing
• Retains Factory Track Bar Mounting Bolts & Hardware
• Allows Centering Of Front Axle When Running A Suspension Lift
• Isolates Noise, Vibration, & Harshness (NVH) Increasing Ride Quality
• Bent To Clear Most Aftermarket Differential Covers With No Additional Lift Height Required
• Synergy Dual Durometer Bushings Eliminate Binding Issues Associated With Stock Vulcanized Bushings
• 100% Bolt-On Components Assures An Easy, Trouble-Free Installation With The Use Of Basic Hand Tools
• Suspension Components Feature An Abrasion-Resistant Powder Coat Finish For Maximum Durability & Corrosion Resistance
• Synergy Double Adjuster Sleeve & Pinch Bolt Assembly Allows For Adjustment Of Track Bar Length Without Removing Control Arm Mounting Bolt
• Features Synergy Dual Durometer Bushings (DDB) With Non-Stick Bearing Surface For A Maintenance Free Design Focusing On Performance, Flex, Longevity, & Ride Quality

Min/Max Length

Measured in straight line from center of bolt hole to center of bolt hole

• Min collapsed length: 38.625"
• Max extended length: 39.438"

Includes

• (1) Grade 8 Hardware Kit
• (1) Synergy Dodge Front Track Bar
• (1) Synergy Double Adjuster Sleeve

WARRANTY INFO

• Limited Lifetime

Note

• 2006-2008 Dodge Ram 1500 Megacab 4WD
• 1994-2002 Dodge Ram 1500/2500/3500 models need to purchase the Synergy Part 8554-02 
• The 2013 Dodge Ram 3500 was a split year for production. If your truck has radius arms use part number 8704-01.