24-164870 Bilstein 5100 Series Steering Damper (Cantilever) - Dodge 2003-2007.5

SKU: BIL24-164870

Mftr. Part#: 24-164870

UPC: 651860643564

Manufacturer: Bilstein Shocks

Be the first to review this product

2003-2007.5 Dodge Cummins 5.9/6.7L - Bilstein's 5100 Series Steering Stabilizers utilize the same high gas pressure monotube design found in their shock absorbers. They feature digressive valving, reducing vibration and wear & tear on steering components. Designed specifically to replace the OEM stabilizer. This damper fits the original style steering linkage (cantilever mount).

PRODUCT DETAILS (click to expand)

Mftr. Part#	24-164870
UPC	651860643564
Weight (lbs.):	5.30 lbs.
Dimensions:	4.13" x 27.00" x 4.13"

PRODUCT SPECS (click to expand)

Attribute name	Attribute value
Product Type	Steering Damper

$149.04

Qty:

NOTE: YOU MUST CHECK YOUR OE STABILIZER ON YOUR VEHICLE FOR PROPER APPLICATION. THIS STEERING DAMPER IS DESIGNED TO FIT THE ORIGINAL STYLE STEERING LINKAGE (CANTILEVER STYLE MOUNT) FOUND ON 2003-2007 VEHICLES. IF IT IS THE NEW STYLE (EYE-TO-EYE) LINKAGE, THEN USE BILSTEIN PART# BIL33-170794.

Old Part Number: F4-BE5-H086-H0

Overview

Bilstein 5100 Series Steering Stabilizers utilize the same high gas pressure monotube design found in our shock absorbers, offering instantaneous response to suspension inputs. These steering stabilizers feature digressive valving, reducing vibration and wear & tear on steering components. Designed specifically to replace the vehicle's OE stabilizer, for easy installation. (zinc-plated steel body, Triple-C-Technology coating)

Details

Collapsed Length (IN): 15.12"
Extended Length (IN): 23.54"
Collapsed Length (MM): 384mm
Extended Length (MM): 598mm
Finish: Zinc plated
Reservoir: No
Body Design: 46mm ID smooth body (Non-coilover)

Note

Due to the variety of aftermarket suspension systems, it is recommended to take precise measurements to ensure proper shock fitment. For a pin-to-eye shock, the correct measurement should be taken from the base of the stem, where the mounting hardware rests, to the center of the eyelet.