2856SNI Redhead Reman Steering Box - Dodge 5.9L Cummins - 1980-1993 - 4 Bolts

SKU: RH2856SNI

Mftr. Part#: 2856SNI

Replace the damaged or worn steering gear in your 1980-1993 Dodge Full Size Truck with the RedHead Steering Gears 2856SNI-3T Steering Box (15:1 Ratio).

PRODUCT DETAILS (click to expand)

Mftr. Part#	2856SNI
Weight (lbs.):	29.00 lbs.
Dimensions:	13.00" x 9.00" x 11.00"

PRODUCT SPECS (click to expand)

Attribute name	Attribute value
Brand	Redhead Steering Gears
Product Type	Steering Box

PRODUCT OPTIONS

Since this is a remanufactured product, a temporary "core charge" is added up front until we receive your original unit back. Once received and inspected, the charge will be reversed back to you. The core charge will be added to the price below. (Required): Add Core Charge [+$425.00]

$654.06

Qty:

Overview

Replace the damaged or worn steering gear in your 1980-1993 Dodge Full Size Truck with the RedHead Steering Gears 2856SNI-3T Steering Box (15:1 Ratio). Remanufactured from quality materials, each RedHead Steering Box is built to be stronger than the OE unit. Family owned and operated, RedHead has more than 40 years of experience specializing in steering boxes. Made for a direct-fit replacement, this Steering Box does not require any modifications for installation.

Features

Remanufactured
Direct-Fit Replacement
Meets & Exceeds Factory Specs
Shafts Are Flame Sprayed Or Replaced As Needed
New Control Valves Installed On Some Applications
Housing Are Machined And Needle Bearings Installed
Sealing Surface Polished To A Higher Polish Than New
Sector Shaft Checked On A Lathe For Straight And True
Worm And Piston Assembled With New Precision Fit Steel Ball Bearings

Specifications

Ratio: 15:1 (3 Turns)
Input: SNI (Small Notch Input) 31 Spline
Output: 32 Spline Sector 4 Master Spline
Fittings: O-Ring
Weight: 29.00 lbs

HOW DO I BLEED, OR PURGE AIR, FROM MY STEERING GEARBOX SYSTEM?

After installing the gearbox, fill the system with fluid.
Raise the front wheels off the ground, do not start the vehicle.
Work the steering wheel back and forth, lock to lock, 15-20 times.
Leave the vehicle sit (overnight is best) at least 2 hours
Top the pump reservoir off again.
Work the steering wheel back and forth again 7-10 times
Have a person in the vehicle and another at the pump reservoir with a container of fluid & funnel ready to pour if necessary.
Instruct the person in the vehicle to start the engine. As soon as this happens, if the fluid level drops, be ready to pour in more fluid. The level must be kept at an almost full level or it will suck in air again.
If this procedure is followed properly, the air problem will be solved.

Notes

Be Aware That This Generation Truck Occastionally Had Manual Steering.
Fits both D-Series and W-Series

Shop By Truck