110-90252 Cognito HD Sway Bar End Links - Stock-3.0" Lift - GMC/Chevy 6.6L Duramax 2001-2019

Features

Heavy Duty Front Sway Bar End Link Kit For a variety of GM applications. This specific kit is typically used for stock, leveled, or lifted 2001-2019 Chevrolet and GMC 1500HD / 2500 / 2500HD / 3500 / 3500HD 2WD / 4WD trucks and 2500 SUVs including Hummer H2s and H2 SUTs and 7” / 9” lifts on 2007-2018 Chevy and GMC 1500 2WD / 4WD trucks and SUVs.

These end links are also a little longer than factory recommended lengths to allow clearance for our Larger Diameter tie-rod upgrade. Used as a Heavy Duty replacement of the factory style end links which are notorious for breaking. Our Sway bar link kits utilize a lower clevis system which takes some of the angle off of the link when the suspension is cycling. Minimizing stress that can cause breakage.

While we often upgrade other manufacturers kits with these links. We recommend you check your current length and match it up to the specs below to help order the correct size if you do not have a Cognito Motorsports lift. Sold in pairs.

(Measured from top of lower control arm up to the bottom of sway bar)

• Lower clevis system which takes some of the angle off of the link when the suspension is cycling minimizing stress that can cause breakage
• Polyurethane bushings
• Made in the USA

Notes

Mounting surface to mounting surface measurement for this kit is 7 Inch (Measured from top of lower control arm up to the bottom of sway bar).