25-285710 Bilstein 5160 Shock Absorber Front - Dodge Ram 2500 4WD 2014-2023 / Dodge Ram 3500 4WD 2013-2018 - 4" Lift

Overview

The Bilstein 25-285710 5160 Series Shock Absorber is a direct-fit shock for your 2014-2023 Ram 2500 4WD or 2013-2018 Ram 3500 4WD (Front) Lifted Height 4". The 5160 Series Shock Absorber gives your vehicle the ability to conquer the harshest environments. Each Shock Absorber comes with a unique 360 degree swivel banjo hose fitting, providing a clean installation. The 5160 Series Shock Absorber has a remote reservoir that provides increased cooling capacity and wheel travel for a better performance than traditional shock absorbers. These Shock Absorbers have a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application.

Features

• Increased Cooling Capacity
• Monotube Design
• 360 Degree Swivel Banjo Hose Fitting

Application Notes

• For Front Lifted Height: 4"
• Position: Front

Measurements

• Collapsed Length: 17.08"
• Extended Length: 25.47"

Note: *Lift Height is suggested by mfg. Due to the many different aftermarket suspension systems it is recommended that a measurement is taken for proper application. A pin to eye shock is measured from the base of the stem where the mounting hardware rests to the center of the eyelet. Shock Absorbers sold individually.

Note

Due to the variety of aftermarket suspension systems, it is recommended to take precise measurements to ensure proper shock fitment. For a pin-to-eye shock, the correct measurement should be taken from the base of the stem, where the mounting hardware rests, to the center of the eyelet.