BDS1622H BDS Suspension 3" Radius Arm Lift Kit - Dodge 6.7L Cummins 2013-2018 3500 (W/ BDS Shocks)

Overview

This kit is perfect for those looking for all the performance of a full-out lift system but with the height of a leveling kit. The new radius arms mount right into the factory locations so installation is simple and clean. Factory alignment adjustability is maintained using the OE eccentric adjusters. In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 1 ton trucks both on and off road. The popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. BDS greaseable front sway bar links reset the sway bar to the optimum angle and round out the main front components. The rear system is a simple 2in block and u-bolt setup to level out the back with the newly lifted front.

Kit Components

• BDS012207: 03-13 Dodge 2500 2in Rear Box X1
• BDS012311: 2013-up Ram 3500 3in Front Box Kit X1
• BDS032302: 4in Coil Box Kit X1
• BDS122321: 2013-up Ram 2500/3500 Radius Arm Box Kit X1
• BDS85700: BDS NX2 Shock Absorber X2
• BDS85759: BDS NX2 Shock Absorber X2

Tire & Wheel Combinations

• 35" x 12.50 w/17" x 9" tires and 5" back spacing
• 35" x 12.50" w/18" x 9" tires and 4.5 back spacing
• 35" x 12.50" w/20" x 9" tires and 4.5 back spacing

Important Notes

• Will not fit cab and chassis models
• Not for use with factory rear airbag suspension
• Although this is pictured with Fox Shocks, this kit will come equipped with BDS NX2 Shocks. If you would like fox shocks, please contact us.

Fitment Note : Fitment mentioned only for Single Rear Wheel (SRW) please contact BDS for Dual Rear Wheel Fitment Confirmation