BDS1549FS BDS Suspension 2.5" Radius Arm Lift Kit - Ford 6.7L Powerstroke 2020-2022 (W/ Fox Shocks)

Overview

From BDS Suspension comes their 2.5 Lift Kit w/ Radius Arm Kit. These kits use full length ProRide coil springs designed to improve the stance of your Super Duty while taking performance, capability and ride quality to the next level with clearance for 35in tires. In place of the factory stamped steel arms this kit upgrades to heavy duty BDS radius arms. These heavy duty arms are built from 1-3/4in OD heavy wall tubing, fully welded with gussets for superior strength to the factory units light weight stamped steel units they are replacing.

At the frame mount a large OE-style rubber bushing is used to better isolate of NHVs and allow for quiet operation without any need for maintenance. These bushings offer superior durability and quieter operation than arms with heims and flex joints.

Also upgraded is a high strength replacement track bar designed to recenter the front axle with the lift installed. This new track bar is adjustable, built from 1-3/8in solid steel stock with gusseted ends and a fine thread center turnbuckle with pinch bolts. The track bar comes pre-assembled and ready to bolt into the factory location to adjust to length.

Rounding out the front of these kits are front brake line relocation brackets to allow enough slack in the lines to cycle the suspension offroad while the sway bar relocation brackets to correct sway bar operating angle for optimal performance without sacrificing approach angle. In the rear, these kits use a 1in bolt-on lift block and e-coated u-bolts to level stance while retaining the factory rear springs for ride quality and tow capacity. Finishing out the rear are a pair of Fox 2.0 performance series gas shocks.

Kit Components

BDS013261: Front Box Kit X1

BDS013108: Rear Block Kit X1

BDS123251: Radius Arm Upgrade X1

BDS033251: Coil Spring Kit X1

FOX98224717: FOX 2.0 Shock Absorber X2

FOX98224720: FOX 2.0 Shock Absorber X2

Fitment Note : Fitment mentioned only for Single Rear Wheel (SRW) please contact BDS for Dual Rear Wheel Fitment Confirmation