BCD20MM BC Diesel Powerstroke Solution w/ Factory Head Gaskets - Ford 6.0L Powerstroke 2006-2007 20mm

Overview

The Best Solution for your 6.0L Ford Powerstroke Diesel. This kit includes everything needed to fix all the major problems with the 6.0L Powerstroke. No more stretched bolts, blown head gaskets, white smoke from the EGR cooler, or defective EGR Valves.

BC Diesel has put all the best names in the industry together in one complete kit to simplify ordering and to make sure you get everything you need to do the job right the first time.

Note: Installation of the EGR Delete Kit will cause trouble codes on 05-07 model year trucks.

Note: Please confirm dowel size when using remanufactured heads. If your manufacture date is 11/01/2006 or older, the engine will have 18MM dowels.  If your manufacture date is 11/01/2006 or newer, the engine will have 20MM dowels.

Kit Contents

• EGR Delete Kit w/ Up-Pipe
• Ford Factory Head Gaskets
• Ford Exhaust Gaskets
• ARP Head Stud Set
• Ford Factory Updated Oil Cooler Kit
• Ford Factory Updated Oil Cooler Screen
• Ford Factory Intake Gaskets
• Ford Factory Turbo Hardware / O-Ring Kit
• EGR Delete Kit With Up-Pipe

OIL COOLER

Ford's newest version oil cooler for the 6.0L Powerstroke. Thicker internal fins minimize the chance of cooler failure. This is a new Ford OEM (not re-manufactured) oil cooler. Includes gaskets for installation.

OIL COOLER SCREEN

A Ford design update changed the oil screen material from a cloth screen which came on all 03-07 6.0L engines to a stainless steel screen. This change allows for better filtration of particles in oil and will not tear like the original cloth screen.

INTAKE GASKETS

Removal of the intake manifold is necessary to install the oil cooler. As a result, we supply you with a new set of intake manifold gaskets.

TURBO BOLT / O-RING KIT

New mounting bolts for re-installation of the turbo and pedestal. New spacer washers and line clip along with new O-Rings for the oil return and pick up lines going to and from the turbo. Also included is a new paper gasket that fits in-between the turbo and turbo pedestal.

HEAD STUDS

ARP makes the best and strongest cylinder head studs on the market today. Your 6.0L came from the factory with head bolts. The factory head bolts were designed to stretch but over time the bolts stretch past the designed length and allow the gaskets to leak. With ARP head studs there is no more stretch or issues with blown head gaskets.

HEAD GASKETS

Important Notes

Ford Factory OEM 6.0L Powerstroke head gaskets. Please check build date for proper dowel size before ordering gaskets.

18mm Alignment Dowels (BCD18mm) - Engines manufactured between September 30, 2003 - Jan 11, 2006 (verify that the icp sensor is located on the passenger side valve cover above the glow plug control module)

20mm Alignment Dowels (BCD20mm) - Engines manufactured January 12, 2006 and newer
EXHAUST GASKETS